Sandvik QJ341 jaw crusher (formerly EXTEC C12)

Capacity – up to 400 t.g. Year of manufacture – 2019 Engine hours – 3391 hours Crusher hours – 2825 hours Maximum equipment British configuration and assembly. High-quality components. Transport Parameters: Length: 14.15 m Width: 2.86 m Height: 3.43 m Weight: 50,000 kg Receiving hole of the crushing jaw chamber – 1200 x 750 mm Maximum recommended size of the largest piece of material in the load – 700 mm Hydraulic adjustment system of the jaw gap (clamping/unclamping) – CSS – to maximize the efficiency of the crusher. (clamping range – from 200mm to 80mm) Reverse system when non-crushed and sticky material enters, for its discharge and cleaning of the crushing chamber. Hydraulic outriggers to withstand the recommended operating horizon Reinforced hopper with walls that are hydraulically folded before transportation and hydraulically unfolded into the working position, increasing the size of the loading hopper from 5 m3 to 8 m3. GRIZZLY grate feeder Deflector protective plate under the crusher discharge opening to protect the belt Side conveyor for discharging small items selected after the grate screen “MAGIC EYE” system – a system of sensors for the level of loading of the hopper or the ingress of oversized pieces of material and automated control of the uniform supply of material by the feeder to the crusher Magnetic metal separator above the main conveyor, allowing to separate reinforcement, for example, from reinforced concrete. The inclination level of the main conveyor is hydraulically adjustable. The conveyor is also hydraulically folded in half before transportation. Cat 9 Euro 3 (Tier 3A) engine Without AdBlue Without particulate filter Automatic lubrication system for all components. Remote control system with wireless joystick and joystick on cable. The machine was under constant full regular maintenance by “Sandvik Northern Ireland” The general condition of the crusher – does not require any investments! Full service, maintenance, spare parts